LKS-FFB-140
| WORKING PRESSURE | SHUT DOWN TIME | DIMENSION | INLET PORT | OUTLET PORT | WORKING TEMPERATURE |
|---|---|---|---|---|---|
| 0.5~10bar (7~140psi) | 1 minute from water contact | 54x40x73 (mm) | 1/4″ Fitting | 1/4″ Fitting | 1~40ºC (33~104ºF) |
GENERAL SPECIFICATION
- One Touch Fitting (ST fitting) has been widely used in various ranges of potable appliances. ST fittings offered in sized 1/4″ to 1/2″ and manufactured with POM and NBR materials.
- The products’ safety is certified for achieving the NSF 51&61.
- It’s easy to connect/disconnect without using a tool.
Note
It is not recommended for explosive gages, heating system and othre pretroleum products.
WORKING TEMPERATURE & PRESSURE
| 1/4″ | 5/16″ | 3/8″ | 1/2″ | |
| 1℃ (34°F) |
15.5 bar (230psi) |
15.5 bar (230psi) |
11.5 bar (170psi) |
11.5 bar (170psi) |
| 20℃ (68°F) |
15.5 bar (230psi) |
15.5 bar (230psi) |
11.5 bar (170psi) |
11.5 bar (170psi) |
| 65℃ (149°F) |
10.0 bar (150psi) |
10.0 bar (150psi) |
6.9 bar (100psi) |
6.9 bar (100psi) |
NOTICE
- Before connecting the tubing into the fitting, make sure the end of the tubing must be cut vertically an must not be damaged/scratched.
- Fitting and tubing are recommended using at the potable appliances. Or, the advice from STORMTEC is necessary before the fitting & tubing equipped into a machine.
- Make sure the pressure in the machine has been removed before disconnecting hte fitting and tubing.
- Do not retate, twist, bend and force the fitting and tubing. those excess can cause a malfuncting, leaking and potential defect.
- We recommend using a fitting spanner while the user disconnects fitting and tubing.
- We guarantee the fitting and tubing for 2years and it must be changed within the period.
- We recommend to cut the scratched tubing and reuse it with spotless condition
DRAWING DOWNLOAD
